Apple 12/640PS manual Add Printer dialog box appears, Installing on a Windows 3.1 computer

17Select LPT1 if the LaserWriter 12/640 PS is connected to your local computer.

18Click Next.

The Add Printer dialog box appears.

19Name your computer and select other options as necessary.

20Click Next.

The printer Properties dialog box appears.

21Click OK to dismiss the Properties dialog box.

A message appears telling you that the driver software was successfully installed.

22Click Add Another to install another Apple LaserWriter printer. Repeat for each printer you want to install.

You can install other Apple LaserWriter printers supported by the software.

23When you’re done, click Exit.

Installation is complete.

24Choose how to proceed:

For users connected via the parallel cable, the default printer driver settings should suffice.

For instructions on using the Apple LaserWriter Utility for Windows, see “Setting Additional Parameters With the Apple LaserWriter Utility for Windows,” later in this chapter.

To configure your printer software with NetWare, see “Initial Novell NetWare Setup,” later in this chapter.

Installing on a Windows 3.1 computer

1Find the Windows disks containing the printer software and make sure they’re write-protected.

Slide up the write-protection tab in one corner of the floppy disk so that you can see through the hole.

74Chapter 3