Apple 12/640PS manual Filling the optional envelope cassette

Filling the optional envelope cassette

1Slide the envelope cassette out of the 500-sheet feeder.

2Move the postcard guide to the back of the envelope cassette, if necessary.

To remove the postcard guide from the envelope tray, pinch the indented area against the front of the guide. Roll the guide toward the front of the envelope cassette and lift up.

To insert the postcard guide in the back of the envelope cassette, tilt the guide toward the front of the envelope cassette and insert the two tabs located on front of the guide into the slots. Roll the guide until its back is against the back of the envelope cassette and locks into place.

3Push down gently on the envelope tray until it rests against the bottom of the cassette and locks into place.

4Lift the back of the envelope cassette and move the length guide until it matches your envelope’s length. Make sure the tab fits into the marked slots.

The cassette is marked with positions for envelopes of Comm10, C5, DL, and Monarch sizes.

5Pinch the color tab (located on the right side of the envelope cassette) against the post and move the envelope width to its maximum setting.

6Insert the envelopes into the cassette with the flap side up and the top edge to the right.

Make sure the envelopes are under this roller.

Adjust this guide to fit the length of the envelopes.

Adjust the width guide here.

Loading Paper 271