Apple 12/640PS manual What to do next

What to do next

Once you decide how you want to set up the printer, proceed as follows:

mPSERVER To set up the printer as a print server, read about how to use PCONSOLE in the next section, then

m if you want a simple setup, read “Step 2, Option A: Setting Up the Printer as a Print Server (Using PCONSOLE),” later in this chapter.

m if you want to assign a password, read “Step 3: Assigning a Password for the Print Server (Optional),” later in this chapter.

mRPRINTER To set up the printer as a remote printer, read about how to use PCONSOLE in the next section, then skip to “Step 2, Option B: Setting Up the Printer as a Remote Printer (RPRINTER Mode),” later in this chapter.

For both PSERVER and RPRINTER, you must also follow the instructions in “Step 4: Setting Up the PostScript Printer Driver for NetWare,” later in this chapter.

For more information about using the Apple LaserWriter Utility, read “Setting Additional Parameters With the Apple LaserWriter Utility for Windows,” later in this chapter.

For instructions on setting up the printer for access by Mac OS clients on a NetWare network, see Appendix B.

80Chapter 3