Apple 12/640PS guide

Configuring ATPS for the first time on a NetWare 4 server

If you are setting up the printer for access by Mac OS computers on a NetWare 4 network and this is the first time you are configuring ATPS, follow these instructions.

You can configure ATPS from the server console, or by running RCONSOLE (remote console) from a client computer.

1At the console prompt, type load install

The Install utility starts and a list of Installation Options appears.

2Choose the Maintenance/Selective Install option and press Enter.

An additional list of product options appears.

3Select Product Options from the list and press Enter.

A list of product options appears. If the NLM is installed and operating, a NW-MAC option will be available.

4Select the NW-MAC option and press Enter.

A list of configuration files appears.

5Select Configure Printer Services and press Enter.

A list of print service configuration options appears.

6Select Quick Configuration and press Enter.

A list of lookup parameter options appears.

7Select the Printer Model entry and press Enter.

A list of printer types appears.

8Select the LaserWriter 12/640 PS option and press Enter.

9In the lookup parameter list, change the zone name to the zone in which the printer is currently located.

10Select the Perform Lookup option and press Enter.

11In the list of installed printers, locate and select the newly installed printer from the list. (It should be identified as “LaserWriter 12/640 PS.”)

324Appendix B

Image 349

Apple 12/640PS manual Configuring Atps for the first time on a NetWare 4 server

Contents

LaserWriter12/640PS Apple Computer, Inc Content Overview 289 Part Troubleshooting301 Part Appendixes Appendix a 315 Appendix B Detailed Contents Setting Up the Printer for Mac OS Users Contents Viii Contents Installing Options 133 165 Mac OS Users Using the Apple Printer Utility 195 Switching between printers197 Windows 3.1 and DOS Users 255 225Printing from a Unix workstation to the printer 254 301 Maintenance315 329 Appendix C Using Fonts With the Printer Appendix D Technical Information 345 Index 357 Radio and television interference FCC statement DOC statement Laser information How Much of This Book Do I Have to Read? What the printer administrator should know Printer administrators and users Who does whatGetting new users started Which chapters should I read? Set up the hardware and connect the printerChapter Computer Network interface and cable Chapter Computer Utility name Configure the printerAdd any hardware options Help new users get started User’s computer Where to find information See Help New Users Get Started, earlier in this preface See Configure the Printer, earlier in this preface Setting Up the Printer for Unix Users Installing Options Guide for Printer AdministratorsPage Main features of the LaserWriter 12/640 PS Setting Up the LaserWriter 12/640 PS Choosing a place for the printer Important safety instructions Chapter Unpacking the printer Parallel interface cable Remove the plastic foam block from inside the printer Take the cartridge out of its packaging Installing the first toner cartridge Setting Up the LaserWriter 12/640 PS Page Top cover clicks into place Wait to install the LaserWriter 12/640 PS optionsClose the printer Slide the paper cassette out of the printer Loading paper into the cassette Prepare a stack of paper Align letterhead and three-hole punched paper as shown Slide the cassette into the printer Push the cassette in all the way Port Network protocols Computer Connecting the printer Obtain a LocalTalk connecting kit Connecting to a LocalTalk network What to do after connecting to a LocalTalk network Obtain a System/Peripheral 8 cable Connecting directly to a single Mac OS computer What to do after connecting to a single Mac OS computer Connecting to an Ethernet network Setting Up the LaserWriter 12/640 PS Obtain a parallel interface cable like this one What to do after connecting to an Ethernet network Secure the clips Make sure the printer is turned off Connecting the power and turning on the printerPlug in the printer Press the on the power switch to turn the printer on Check the status lights Saving energy Why customize communication settings? Adjusting communication settings What to do next How to customize communication settings Setting Up the Printer for Mac OS Users Before you begin Initial AppleTalk setupSystem requirements Installing from the CD-ROM disc Installing the printer softwareDisc’s icon appears on the desktop After a moment, a Welcome dialog box appears Click the Install button Creating installation disks from the CD-ROM discClick the Restart button Disk’s icon appears on the desktop Installing from the floppy disksDouble-click the Floppy Disk Maker application. Click Full Make sure the disks are locked Click Continue Choosing the printer More information about the Installer programChooser window appears Making sure everything is working Naming the printer and setting its zoneClick Print Using the Apple Printer Utility Configuring the printerWhat to do next Chapter Double-click the Apple Printer Utility Opening the Apple Printer Utility Click Open Printer Viewing printer information Quitting the Apple Printer UtilityTo quit the Apple Printer Utility Choose Quit from the File menu Name panel appears with the selected printer’s current name Naming the printerOpen the Name category Fonts panel appears Downloading fonts to the printerFile selection dialog box appears Printing font samples Removing fontsSelect the fonts you want to remove Click Remove Click OK Choose Print Font Samples from the Utilities menu Turning the startup page on or off Click Send to send the startup page setting to the printerStartup Page panel appears Open the Startup Page category Print Density panel appears Setting the print densityOpen the Print Density category Paper Handling panel appears Setting paper-handling optionsOpen the Paper Handling category If you want to You need this much printer memory Choose the output tray from the pop-up menu Selecting imaging options Open the Imaging Options category Imaging Options panel appears Open the Extended Job Status category Setting up job handling You see a list of communication settings options Setting the printer’s network zonesYou can specify the EtherTalk network zone for the printer List of the EtherTalk zones appears Changing TCP/IP configurationsOpen the Printer’s Zone category Open the TCP/IP Configuration category Viewing and changing the communication settingsPanel appears in which you can enter the IP address List of port connections and protocol choices appears Open the Port Configuration category Choose the port settings you want Resetting the communication settings Restarting the printer Sending PostScript files to the printerChoose Send PostScript File from the Utilities menu Choose Restart from the Utilities menu Printing a configuration Getting Mac OS users started using the printerChoose Print Configuration Page from the Utilities menu Preparing a server using the CD-ROM disc Installing onto a serverPreparing a server using the floppy disks Dialog box opens to describe the installation Installing the printer software from the serverClick the Continue button to close the dialog box If you want to See Page System requirements for Windows NetWare Users Setting up for DOS-based printing Installing the printer software for Windows 95 and Windows Setting up for parallel port printingInstalling from the CD-ROM disc Installing onto a Windows 95 computer Click Express Installation Setup Program Location dialog box appearsClick Next if you have no other open applications Select Yes, if desired, and click Next Installation is complete Install PostScript Printer from PPD dialog box appearsAdd Printer dialog box appears Printer Properties dialog box appears Choose how to proceed Installing onto a Windows 3.1 computerClick Continue if you have no other open applications Click Yes to view the README.WRI file Click Restart Windows Click Express InstallClick OK to dismiss the message For example, LPT2, or a NetWare queue Setup, later in this chapterShould suffice This chapter Creating floppy disks from the CD-ROM disc Window appears that displays the contents of the CDFrom a Windows 95 computer From a Windows 3.1 computer Installing on a Windows 95 computer Installing from the floppy disks Setup Program Location dialog box appears Installing on a Windows 3.1 computer Start Windows Click Express Installation Print Manager appears Installing the printer software for Windows NTCreate Printer dialog box appears Choose Create Printer from the Print Manager’s Printer menu Click Continue and OK to complete the installation Initial Novell NetWare setupFollow the instructions on the screen Choosing an operating mode What to do next Command key Description Using Pconsole Utility starts Specifying a print serverLog on to a file server from DOS on a client computer At the DOS prompt, type Pconsole and press Enter If available, a list of print servers appears Assigning the operating modeExample Defined Printers list appears Printer Configuration menu for your printer appearsPrinter type list appears Ethernet falls into the Other/Unknown category Press Esc until Pconsole quits Press Ins to view a list of available queue serversTurn the printer off and then back on Chapter Log on to a file server from a DOS client PC Press Send Configuration window appears for the selected printer Configuration window for the selected printer appearsIf available, a list of available print servers appears Print Server Information menu appears Creating a print queue Associating a print server with the print queue Window appears, showing the printer configurationSelect the printer you defined earlier and press Enter Select Print Queues Assigned and press Enter Load pserver PS486 Retype the password and press Enter Assigning a password for the print server optionalList of print servers appears For Windows Setting up the PostScript printer driver for NetWareConnect dialog box opens Making sure everything is working Installing the Apple LaserWriter Utility for Windows Name Printer dialog box appears Naming the printer on AppleTalk networksPrints confirming the choice Paper Handling dialog box appears Choose a default paper size for the multipurpose trayChoose Paper Handling from the Utilities menu Choose the output tray from the list box Printing a list or samples of printer fonts Viewing or changing communication settingsClick Print Font Catalog or Print Font Samples Communication switch Click Set Port Configuring TCP/IP Printing the Ethernet address Setting imaging optionsTo print the printer’s Ethernet address Dialog box appears Choose Imaging Options from the Utilities menu Imaging Options dialog box appears Specifying a font symbol set Printing the configurationPrinting the page count Choose Restart Printer from the Utilities menu Connecting to a network printer manuallyClick Restart Installing Type 1 fonts and Adobe Type Manager Setting Up the Printer for Unix Users Background information Initial TCP/IP setupObtaining an IP address for the printer Assigning an IP address to the printer Printer IP name is the same name you used in steps 3 Ping printerIPname Use telnet to make this the permanent IP address Chapter Configuring Sun Solaris Configuring Users’ WorkstationsRun admintool Ps aux grep lpd If -f /usr/lib/lpd then Example Log in to the system console as root Configuring HP-UX versionRun the SAM utility by typing sam at the Unix prompt Enter information into the remote printer form, as follows Select the following options, in order, from the SAM menu If the test document doesn’t print, follow these steps If the test print doesn’t workLeave SAM Start the LP request scheduler by typing Form appears for you to define a remote printer Repeat the steps in Configuring HP-UX Version Remote printer name Type text Enter information into the remote printer form as followsPrinter class Optional Printer stream tcp nowait root /usr/lib/rlpdaemon rlpdaemon You return to the Unix prompt Configuring SCO Unix Chapter Configuring IBM AIX version Enter information into the remote printer form, as follows Configuring Silicon Graphics Irix Logging in to the TCP/IP Printer Configuration Utility Using the TCP/IP Printer Configuration UtilityEnter a password To run the utility, follow these steps Printing the configuration Quitting the Configuration UtilityTurning the banner page feature on or off Displaying information about the printer’s TCP/IP interface Viewing or changing the printer’s IP address Setting the subnet mask Enabling or disabling connection timeout checking Setting the default gateway addressChanging the password for this utility Characters you type will not appear on the screen Restoring settings to their factory defaults Resetting the printer’s TCP/IP interfaceTo restore the settings to their factory defaults Installing Options Installing the duplex printing unit 135 Unpack the duplex printing unit key 137 Locking connectors secure the paper guide to the printer 139 Chapter 141 Installing the 500-sheet cassette and feeder 143 Locking connectors secure the printer to the feeder Removing the 500-sheet cassette and feeder Configure your printer software to use the envelope feeder Installing the envelope cassette Slide out the tray until it locks into place Installing the face-up output tray Extend the tray Slide out the tray until it locks into place Extend the tray Removing the face-up output tray Increasing the printer RAM Installing RAM Open the top cover of the printer Removing the printer’s side cover Pull the side cover off Putting on the grounding strap Copper-foil end Metal lip 155 Installing SIMMs Gently angle Replacing the side cover Repeat to install the second Simm if necessaryRemove and discard the grounding wrist strap Chapter Configuring the printer from a Mac OS computer Configuring your printer software for new optionsLaserWriter Setup dialog box appears From the desktop printer icon Chooser dialog box appears From the Chooser Features dialog box appears Configuring the printer from a Windows 3.1 computerClick the Features button Configuring the printer from a Windows 95 computer Chapter Windows 95 Users Unix Users Chapter Mac OS UsersLoading Paper Page Mac OS Users Installing the printer software Before you install the printer softwareDrive 167 Installing from the floppy disks 169 Click the LaserWriter 8 icon in the left half of the Chooser Selecting and setting up the printer Click the name of your LaserWriter 12/640 PS Small printer icon appears beside the printer name Making changes to the printer setup Setup dialog box appears Selecting page setup optionsChoose Page Setup from the File menu Printing PostScript Options dialog box appears Select the page setup options you want Printing documents Click OK to close the Page Setup dialog box Choose Print from the File menu Print dialog box appearsSelect the options you want Printing a cover page automatically Printing grayscale documents Choose Color Matching from the Settings pop-up menuCover page options dialog box appears Color Matching dialog box appears Make the selection you want Printing with FinePrint or PhotoGrade Choose Imaging Options from the Settings pop-up menu Printing on both sides of the paper Choose Layout from the Settings pop-up menuLayout dialog box appears PostScript Printer Options dialog box appears Printing to a fileMake the selections you want Background printing and setting the print time Choose Printer Options from the Settings pop-up menu Choose Background Printing from the Settings pop-up menuSelecting the output tray Background Printing dialog box appears Reporting errors Choose Error Handling from the Settings pop-up menu Error Handling dialog box appears Printing with a desktop printer Printing PostScript files as text Switching between printers Select a new printer using the Chooser Select the printer using its desktop printer iconClick the icon of the desktop printer you want to use Determining the status of a printer by looking at its icon Working with desktop printer icons Double-click the desktop printer icon you’re interested Monitoring printingChoose what you’d like to do Chapter Turning off the Desktop PrintMonitor Turning off or removing the desktop printing software Removing the desktop printing software Select the option that you want Click Setup Chapter Windows 3.1 and DOS Users System requirements for Windows Installing the printer software for Windows Select the drive that holds your CD from the Drives list box Click Install 201 Installing from the floppy disks 203 What to do next 205 Printing from Windows applications Opening the printer Setup dialog box from the Control Panel Setting printer driver options Opening the printer Setup dialog box from your application Selecting printer options in the Setup dialog boxThis command usually displays the Print Setup dialog box Opening the printer Setup dialog box from the Print Manager 209 PostScript Additional printer options 211 Fonts 213 Features Job Control Watermark Edit Watermark Downloading fonts Printers dialog box appears Downloading fonts manually to RAM Font Downloader dialog box appears You are returned to the Setup dialog boxClick Fonts Click Font Downloader Click Download Printing to a PostScript file Changing your printer setup to print to a PostScript file Using the driver to print to a PostScript fileDriver Setup dialog box appears Connect dialog box appears Printing to a PostScript file Restoring your printer setup optionsYour program’s Print dialog box appears Dialog box appears that asks you to name the file DOS notes Using the Apple LaserWriter Utility for WindowsCapturing a print queue for DOS printing Windows 95 Users Before you begin 227 Add Printer dialog box appears 229 Setup Program Location dialog box appears 231 Setting up for NetWare-based printing 233 Setting printing properties Choose Print from the File menu Click Properties Selecting printer options in the Properties dialog box Setting document margins Setting duplex printing options Graphics Device Options 241 PostScript 243 Advanced PostScript options Watermarks Edit watermark Specifying how to send TrueType or PostScript fonts General Details Add Port Spool Settings Sharing Using the Apple LaserWriter Utility for Windows Unix Users Examples for lpr Printing from a Unix workstation to the printerExamples for lp Loading Paper Automatic or manual printing with the LaserWriter 12/640 PS Using the paper cassette Letter-size paper Legal and other size paper Letterhead paper and three-hole punched paper Using the multipurpose tray To use the multipurpose tray you must first open it Opening the multipurpose tray Placing paper and envelopes in the multipurpose tray Adjust this guide to fit the width of your paper Loading three-hole punched paper in the multipurpose tray Loading letterhead paper in the multipurpose tray Loading envelopes in the multipurpose tray Chapter Printing an envelope Set your program to print using the multipurpose traySet your program to print lengthwise on the envelope Loading labels in the multipurpose tray Loading transparencies in the multipurpose tray Choosing paper Filling the optional envelope cassette Insert the envelope cassette into the 500-sheet feeder Filling with postcards 273 Filling the optional 500-sheet cassette Insert the paper cassette into the 500-sheet feeder Page Maintenance Safety first Precautions during maintenance Regular maintenanceReplacing the toner cartridge Open the printer cover Remove the used cartridge Slide the square back and forth Maintenance Page Close the printer and resume printing Cleaning the exterior Fixing Paper and Image Problems Fixing Other Problems TroubleshootingPage Fixing Paper and Image Problems Light Off Checking the indicator lightsFlashing Checking for and clearing paper jams Chapter 293 Checking the optional 500-sheet cassette and feeder Checking the optional duplex printing unit Avoiding paper and envelope jams and wrinkling Paper curls when you print on it Problems with printed documentsQuality of grayscale art could be better Toner does not stay fixed on the paper Image is too light Nothing is printed on the paperImage is too dark Unwanted lines or stripes appear Prints solid blackImage is wavy or distorted Toner smudges appear on front or back of paper Blotchy areas or ghost images appear on Faded areas or white voids appear onPrinter isn’t printing from the correct paper tray Troubleshooting with the indicator lights Fixing Other ProblemsMac OS computer troubleshooting Chooser does not appear in the Apple K menu Printer is not listed in the Chooser No LaserWriter 8 icon appears in the Chooser 303 Nothing is printed no paper comes out of the printer Desktop printer icons appear as folders Message on the screen says the printer can’t print Desktop printing software needs more memory on the computer Desktop printer icon has an X drawn through itWant to turn the manual feed message on or off IBM PC or compatible troubleshooting Novell NetWare troubleshooting Nb /na /nff /nt /ti=30 Turn off the banner page in the /etc/printcap file Unix troubleshooting Rarp server is not responding Only one user at a time can telnet to the printer Bootp server is not respondingCan’t ping the printer by IP name or IP address Can ping the printer, but I can’t telnet to it IVpart Page What each utility does Appendix a Administrator Tools Quick ReferenceApple Printer Utility for Mac OS Apple LaserWriter Utility for Windows Utilities for Windows, DOS, and NetWare 317 TCP/IP Printer Configuration Utility for Unix Which functions are in which utilities Adjusting print quality Administering NetWare networks for DOS and Windows users Administering LocalTalk/EtherTalk networks for Mac OS usersAdministering TCP/IP networks for Unix users Managing fonts Configuring options Configuring the communication portsManaging page-description languages Page Appendix B Setting Up the Printer as an Atps Remote Printer Configuring Atps for the first time on a NetWare 4 server Window appears, displaying the fields contents Configuring Atps for the first time on a NetWare 3.x serverPrompt appears, asking if you want to create a new file Prompt appears, asking if you want to save your changes List of configuration files reappearsType y and press Enter Press Esc to quit editing Select the SYS\SYSTEM\AUTOEXEC.NCF file and press Enter Window appears, displaying the file’s contents New configuration is immediately available Kinds of fonts Appendix C Using Fonts With the Printer Bitmapped fonts PostScript fonts TrueType fonts QuickDraw GX imaging technology TrueType and bitmapped fonts How TrueType fonts work with other kinds of fonts Keeping two font versions available TrueType and PostScript fonts How the Mac OS looks for fonts Where fonts are stored Suitcases 339 Styled fonts Common questions about fonts Why don’t all of my fonts appear in the Fonts menu?Here are some questions that often come up about fonts What kind of fonts should I buy? What does the term Apple classic fonts mean? What’s a downloadable font? What is font substitution?Page Appendix D Technical Information SpecificationsFuji Xerox P893 laser-xerographic Twisted Pair 10BASE-T Thick Coax 10BASE-5 Printer fonts Average number of prints between failure is 180,000 pages Dimensions Printer only Envelope sizes and weights Weight SizeHeight .2 cm Width 15.9 in .5 cm Depth 16.7 in .4 cm Paper Type Size Height Environmental informationHeight 16.2 in .1cm Width Approximately 30 lb kg Voltage requirements Power consumption103.5 to 126.5 VAC, 58 to 62 Hz 26 W About PostScript Printer Description PPD files Simm dimensions RAM upgrade specificationsSimm sizes and speeds Size Configuration Speed Ozone emission These settings can be changed to the following modes Communication settings Part Number Accessories Index Index Sheet cassette and feeder option paper cassette Atps Index Index Index Index Index Index Index Index Index Index Index See Rarp ROM Index Telnet Index Index Index