Apple 12/640PS manual Legal and other size paper

5Adjust the width guide so that it fits snugly against the paper, but not so tightly that it might cause binding.

To avoid paper jams, always set the length and width guides to the correct positions for your particular paper.

Adjust the length and width guides to fit the size paper you’re using.

Legal and other size paper

1Set the length guide (located on the back of the cassette) to the position that corresponds to your paper’s length. You adjust the length guide by pushing or pulling the guide.

The cassette is marked with positions for paper of U.S. letter (8-1/2 x 11), A4, B5, Executive (7-1/4 x 10-1/2), and U.S. legal sizes (8-1/2 x 14).

2Adjust the width guide to its maximum width by squeezing the colored lever (located on the right side of the cassette) against the brace and sliding the guide outward.

3Push down gently on the paper tray until it rests against the bottom of the cassette and locks into place.

4Slide the paper beneath the bracket at the front left of the cassette. Push the paper down if necessary, but don’t overload the cassette, or the paper may jam when you print.

5Adjust the width guide so that it fits snugly against the paper, but not so tightly that it might cause binding.

To avoid paper jams, always set the length and width guides to the correct positions for your particular paper.

258Chapter 10