Apple 12/640PS manual Specifying a print server, Utility starts, Press F4

1

2

3

Step 2, option A: Setting up the printer as a print server (using PCONSOLE)

To set up your printer as a print server you must run PCONSOLE under DOS to specify the print server (PSERVER mode) and create a print queue.

IMPORTANT The procedures in this section are specific for a version of PCONSOLE running under NetWare 4.02. If you are running PCONSOLE under NetWare 4.1 or NetWare 3.x, the menus and commands will differ somewhat.

Specifying a print server

Your first task is to start PCONSOLE and specify the LaserWriter 12/640 PS as the print server.

Log on to a file server from DOS on a client computer.

IMPORTANT You must have supervisor or equivalent privileges to create a print server.

At the DOS prompt, type PCONSOLE and press Enter.

The utility starts.

Press F4.

This changes PCONSOLE to bindery mode, and the Available Options menu appears, displaying printer console options.

Print Queues

Print Servers

Quick Setup

Change Current NetWare Server

82Chapter 3