Apple 12/640PS manual 229

1

2

3

Note: If you don’t already have your NetWare queues set up, go to “Initial Novell NetWare Setup,” in Chapter 3, when you finish installing the software.

For instructions on using the Apple LaserWriter Utility for Windows, see “Setting Additional Parameters With the Apple LaserWriter Utility for Windows” in Chapter 3.

To configure your printer software with NetWare, see “Initial Novell NetWare Setup” in Chapter 3.

For instructions on using Adobe Type Manager, see the documentation accompanying the ATM software.

Installing from the floppy disks

Find the Windows disks containing the printer software and make sure they’re write- protected.

Slide up the write-protection tab in one corner of the floppy disk so that you can see through the hole.

Start Windows 95.

Before installing the software, make sure the Windows Control Panel and Printer folder are closed.

Insert LaserWriter Disk 1 for Windows 95 into a floppy disk drive.

Note: If you are installing from disks made from the CD, the floppy disk labels may be different.

4Click the Start Icon on the Task-Bar and select Run.

5Type a:\setup or b:\setup (depending on which drive holds your installation disk) in the command line field and click OK.

After a few moments, a message appears warning you to close all other applications before continuing with this installation.

Windows 95 Users 229