Apple 12/640PS manual Installing from the floppy disks, Installing on a Windows 95 computer

Installing from the floppy disks

Installing on a Windows 95 computer

1Find the Windows disks containing the printer software and make sure they’re write- protected.

Slide up the write-protection tab in one corner of the floppy disk so that you can see through the hole.

2Start Windows 95.

Before installing the software, make sure the Windows Control Panel and Printer folder are closed.

3Insert LaserWriter Disk 1 for Windows 95 into a floppy disk drive.

Note: If you are installing from disks made from the CD, the floppy disk labels may be different.

4Click the Start Icon on the Task-Bar and select Run.

5Type a:\setup or b:\setup (depending on which drive holds your installation disk) in the command line field and click OK.

After a few moments, a message appears warning you to close all other applications before continuing with this installation.

6Click Next if you have no other open applications.

If you have open applications, click Cancel to stop this installation. Close all other applications and start the installation process again.

A message appears that lets you view the README.WRI file for late-breaking news.

7Click Yes to view the README.WRI file.

8When you have finished reading the README.WRI file, choose Exit from the File menu in the WordPad application.

A Welcome message is displayed that allows you to select Express Installation, Custom Installation, or Printer Driver Only.

72Chapter 3