Apple 12/640PS manual 203

Custom Installation lets you specify what portions of the software you would like to install.

Printer Driver Only installs only the PostScript printer driver and printer description files.

De-Install lets you remove previously installed LaserWriter software.

9Click Express Installation.

A window appears that keeps you informed as file decompression proceeds. Next, the Installer asks you to press a button to restart Windows.

10Click Restart Windows.

After Windows restarts, the Adobe PostScript Printers control panel appears.

11

12

13

Remove LaserWriter Disk 1 for Windows 3.1 and insert LaserWriter Disk 2 for Windows 3.1.

Select a: or b: (depending on which drive holds your installation disk) from the Drives list box.

Select the LaserWriter 12/640 PS and click Install.

The PostScript printer driver files and other software are installed on the hard disk. A message appears telling you that the driver software was successfully installed.

14Click OK to dismiss the message.

15Select another Apple LaserWriter printer, if you want, and click Install to install. Repeat for each printer you want to install.

You can install other Apple LaserWriter printers supported by the software.

16When you’re done, click Close.

A message appears telling you to use the Printers control panel to connect and set up the printers you’ve installed. By default, each printer uses LPT1. The Printers control panel Setup dialog box lets you specify a different port, for example, LPT2, or a NetWare queue.

17Click OK to dismiss the message.

Installation is complete.

Windows 3.1 and DOS Users 203