Apple 12/640PS manual Add Printer dialog box appears

15Select Disk 3 from the Directories list.

16Select LaserWriter 12/640 PS from the PostScript Printer Descriptions Available list and click Next.

17Select LPT1 if the LaserWriter 12/640 PS is connected to your local computer.

18Click Next.

The Add Printer dialog box appears.

19Name your computer and select other options as necessary.

20Click Next.

The printer Properties dialog box appears.

21Click OK to dismiss the Properties dialog box.

A message appears telling you that the driver software was successfully installed.

22Click Add Another to install another Apple LaserWriter printer. Repeat for each printer you want to install.

You can install other Apple LaserWriter printers supported by the software.

23When you’re done, click Exit.

Installation is complete.

24Choose how to proceed:

For most users connected via the parallel cable, the default printer driver settings should suffice. If your computer is connected to the printer over a NetWare network, follow these steps:

m Double-click the Network Neighborhood icon.

m In the dialog box that appears, double-click the server where the printer queue you want to use is located.

m Double-click the printer icon representing the printer queue you want to use.

m Follow the instructions on the screen for setting up the printer.

228Chapter 8