3Push down gently on the envelope tray until it rests against the bottom of the cassette and locks into place.

4Lift the back of the envelope cassette and move the length guide until it matches your postcard’s length. Make sure the tab fits into the marked slots.

5Pinch the color tab (located on the right side of the envelope cassette) against the post and move the envelope width to its maximum setting.

6Insert the postcards into the envelope tray.

The side of the postcard to be printed should be face down with the top of the postcard to the right.

7Adjust the width guide so that it fits snugly against the postcard, but not so tightly that it might cause binding.

To avoid jams, always set the length and width guides to the correct positions for your particular postcard.

8Insert the envelope cassette into the 500-sheet feeder.

Note: To avoid curled postcards, direct the output to the face-up output tray.

Loading Paper

273

Page 298
Image 298
Apple 12/640PS manual 273