Airlink101 ASW324 Power on the Switch, Connecting the Switch, Connection, Technical Support

19-inch equipment rack. To do this, first install the mounting brackets on the Switch’s side panels (one on each side), secure them with the included screws, and then use the screws provided with the equipment rack to mount the Switch.

2.4 Power on the Switch

The Switch has a universal power supply ranging from 100V to 240V AC, 50 ~ 60Hz power source. The AC power connector is located at the rear of the unit adjacent to and the system fan. The switch’s power supply will adjust to the local power source automatically.

3Connecting the Switch

This section describes how to connect the Switch to your 10/100Mbps Fast Ethernet network.

3.1 Connection

Your network device (i.e. computer, switch, IP Camera, VoIP) can be connected to any port of the Switch via a two-pair Category 5 Cable. If the LED indicators do not light up after

making a proper connection, check your network device, the cable, the Switch conditions and connections.

4Technical Support

E-mail: support@airlink101.com

Toll-Free: 1-888-746-3238*

Web Site: www.airlink101.com

*Free Voice Technical Support is only available within the hardware warranty (1-Year Limited Warranty from the date of purchase). Customer is required to provide invoice as purchase evidence.

**Network conditions and environmental factors as well as network overhead lower actual data throughput rate.

Copyright © 2009 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S. and foreign patents and pending applications, mask work rights, and copyrights.

8 9