Airlink101 AWLH4030 user manual Advance Setting, Power save Mode

Advance Setting:

Disable Radio: Check the box to disable the radio signal

Radio Frequency: 802.11b/g switches automatically between 802.11b and 802.11g speed depending on the other wireless devices. 802.11b will only connect at 802.11b speed (11 Mbps or lower).

Start ad hoc network: Choose the appropriate frequency for your ad-hoc network

Ad-Hoc Channel: Choose the desired channel for your ad-hoc network. All devices in the ad-hoc network must use the same channel.

Power save Mode:

Fast Save - This setting consumes half the power. Max Save - This setting consumes the least power. Disable - This default setting consumes the most power.

Transmit Power: Choose to transmit power from 100%, 50%, 25%, 12.5% and Lowest.

Super G: Enable or Disable the Super G function (108Mbps). In order to transfer speeds at 108 Mbps, all wireless devices must be Super G compatible and set to use Super G. Fragmentation Threshold: Set the desired fragmentation threshold

RTS Threshold: Set the desired RTS threshold

20