Aiwa AV-D25 manual Electronic Graphic Equalizer, Dsp Surround, To cancel the selected mode

ELECTRONIC GRAPHIC

EQUALIZER

GEQ

GiQ

This unit provides the following five different equalization modes.

ROCK: Powerful sound emphasizing treble and bass

POP: More presence in the vocals and midrange

JAZZ: Accented lower frequencies for jazz-type music

CLASSIC: Enriched sound with heavy bass and fine treble

BGM: Calm tone with suppressed bass and treble

Press one of the GEQ (Graphic Equalizer) buttons.

The selected mode name appears on the display for four seconds, and the selected mode on the display is enclosed with parentheses.

Selected mode

To cancel the selected mode

Press the selected button again. “GEQOFF appears on the display.

To select with the remote control

Press the GEQ button repeatedly until the desired equalization mode is displayed.

DSP SURROUND

n.Z=

\

C3QC2

cac2Qc2, (J C2ua’

MANUAL

SELECT

UP>,

DOWN<

DSP DOWNY

The DSP (Digital Signal Processor) surround circuits can recreate the effect of sounds reflected from walls or ceilings, to obtain the sound presence of real environments. There are four modes with matching graphic equalization modes. Equalization modes are selected automatically and can also be selected or turned off to suit your preference.

Press one of the DSP buttons (DANCE, LIVE, HALL or ARENA).

The selected mode name appears on the display for four seconds, and the selected DSP and matching GEt2 modes on the display are enclosed with parentheses.

Selected DSP mode

Matching GEQ mode

When the music source is monaural

Select LIVE to obtain a simulated stereo effect. When DANCE, HALL or ARENA is selected, no sound will be heard from the surround speakers.

To cancel the selected mode

Press the selected button again. “DSPOFF appears on the display. Even if canceling the selected DSP mode, the matching or selected GEQ mode still remains. To cancel both the selected DSP mode and the matching (or selected) GEQ mode at the same time, press the DSP/GEQ OFF button.

To select with the remote control

Press the DSP button repeatedly until the desired DSP mode is displayed.

To adjust the volume and balance of the surround speakers

Press the MANUAL SELECT button twice or three times, while the DSP system is turned on, to display “S-R OdB (for right surround speaker) or “S-LOdB (for left surround speaker). Then press the DOWNVor UPA button repeatedly within four seconds.

Note that the surround speakers volume and balance of the 5.1 CH and Dolby Pro Logic modes are also changed.

●The DSP system is automatically canceled:

-when the Dolby Pro Logic is turned on

-when the 5.1 CH function is selected

●The DSP system cannot be turned on:

-while the 5.1 CH function is selected

-while headphones are plugged in

ENGLISH 8