OTHER SETTINGS

ENTER

MULTI JOG

JOG +,-

MID NIGHT

MANUAL

SELECT

SHIFT

ADJUSTING LOW FREQUENCY SOUND EFFECT (LFE)

The disc recorded in Dolby Digital surround contains special signals called LFE to enhance low frequency sound ef fect. The LFE signals are recorded in some particular parts on the disc and output from the connected sub woofer to reproduce astonishingly powerful low sound.

The sound level of the LFE signals can be adjusted according to your speakers.

Preparation

Play a disc recorded in Dolby Digital surround.

1 Press MANUAL SELECT on the remote control.

“LFE” is displayed.

2 Press JOG +or -to adjust the LFE level.

The unit is initially set to 0 dB (maximum) and can be adjusted as follows:

OFF–10 dB–5 dB0 dB

MULTI JOG on the unit is also available.

When selecting “SUBW OFF”, the LFE signals are redistributed to other speakers.

ADJUSTING DYNAMIC RANGE

Dynamic range of the sound can be adjusted. The unit is initially set to “STD” (standard) mode.

Preparation

Play a disc recorded in Dolby Digital surround.

1 Hold down ENTER (hold down SHIFT and press MID NIGHT).

“MID NIGHT THEATER” runs through on the display .

2Turn MULTI JOG (press JOG + or -) to select “MIN”, “MAX” or “STD”.

MIN: You can enjoy the full dynamic range of sound like in the movie theater .

STD: Original position, when playing back in home, that is recommended by the software producers.

MAX: Select this mode when playing back at low volume.

TO LISTEN TO THE ORIGINAL DTS SOUND

When “dts” appears on the display , all the sound settings can be canceled.

Preparation

Play a disc recorded in DTS surround.

1 Press ENTER.

“BY-PASS OFF” is displayed.

2Press ENTER again so that “BY-PASS ON” is displayed.
To restore the sound settings

Repeat steps 1 and 2 so that “ BY-PASS OFF” appears.

To operate with the remote control

Hold down SHIFT and press MID NIGHT repeatedly .

16 ENGLISH