RCA 36V430T Connections & Setup, 1A 1D 1B, Tv + Dvd + Vcr, Connect your DVD Player to your TV

Connections & Setup

VCR					TV (back panel)
VIDEO	AUDIO		OUT TO TV	CH4	R	L	OUTPUT	AUDIO
	OUT
				CH3
	R	L	IN FROM ANT		2			VIDEO
	IN
	R	L			Pr	Pb	Y	1
			3		TV ANT
					R	L/MONO
					AUDIO		VIDEO	S-VIDEO IN
				From Cable
				or Antenna

1A 1D 1B

DVD

1C

OUT

R L VIDEO Pr Pb Y

S-VIDEO

TV + DVD + VCR

1.Connect your DVD Player to your TV.

A.Connect the audio (white and red) cables to the R and L/MONO AUDIO jacks on the back of the TV and to the Audio Output jacks on the DVD player.

B.If your DVD player has Component Output Jacks (Y, Pb, Pr), connect three video grade cables to the Y, Pb, Pr jacks on the DVD player and to the Y, Pb, Pr jacks on the back of the TV. If your DVD player doesn’t have Y, Pb, Pr jacks, go to C.

-OR-

C.If your DVD player has an S-Video jack, connect an S-Video cable to the S-Video jack on the DVD player and to the S-VIDEO IN jack on the back of the TV. If your DVD player doesn’t have an S-Video jack, go to D.

-OR-

D.Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the VIDEO jack on the back of the TV.

2.Connect your TV to your VCR

Connect a coaxial cable to the TV ANT jack on your TV and to the Output Jack on your VCR (sometimes labeled OUT TO TV).

Note: If your VCR has A/V output jacks, you can connect your TV to your VCR using audio/video cables for better quality.

3.Make sure cable or antenna is connected to your VCR.

Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR.

Go to page 7

4 Graphics contained within this publication are for representation only. Chapter 1