SOUND

CUSTOM AUDIO ADJUSTMENT

MASTER VOLUME

BALANCE MUTING

DSP SURROUND

MULTI JOG

DSP

JOG

+,-

 

 

TONE

MULTI JOG

BASS

 

 

TREBLE

VOLUME

 

 

+,-

JOG +,-

DSP

SOUND

BALANCE

MUTING

VOLUME CONTROL

Turn MASTER VOLUME (press VOLUME +,-). Adjust from 0 (minimum) to 49 and MAX (maximum).

Volume level setting is retained during power-of f standby . If the unit is turned of f with the volume set to 21 or higher , it is automatically turned down to 20 the next time the unit is turned on.

Left and right balance of the front and surround speakers

1 Press BALANCE repeatedly .

“ L/R 0dB” and “ LS/RS 0dB*” appear alternately .

“L/R 0dB” means that the left and right front speakers level is the same.

“LS/RS 0dB*” means that the left and right surround speakers level is the same.

Select one of them to adjust it.

* This is not displayed in stereo mode (SURROUND of f or DSP off) or when the surround speakers are set to “ NONE”.

2Turn MUL TI JOG (press JOG +,-repeatedly). Example:

“ L>R 5dB” means that the left front speaker level is 5 dB higher than that of the right front speaker .

“ LS<RS 10dB” means that the right surround speaker level is 10 dB higher than that of the left surround speaker .

NOTE

•The adjustable level ranges from 0 to 10 dB.

•The surround speaker balance can be adjusted only when SURROUND or DSP is set to on and the surround speakers are not set to “ NONE”.

Muting the sound temporarily

Press MUTING so that “ MUTE ON” appears on the display . The sound is muted.

To return to the previous volume level, press MUTING again. “ MUTE OFF” is displayed.

To reset the volume and balance to the default value, press and hold BALANCE until “ LVL RESET” is displayed.

All the speaker volume as well as the left and right balance of the front and surround speakers are reset to the default value (0 dB).

BASS AND TREBLE

Turn BASS or TREBLE.

The adjustable level for the bass sound and the treble sound ranges from –10 to +10 dB at 2 dB steps.

Adjusting bass and treble with the remote control

The DSP (Digital Signal Processor) surround circuits can recreate the ef fect of sounds reflected from walls or ceilings, to obtain the sound presence of real environments. The unit provides 5 DSP preset modes.

1Press DSP.2Within 6 seconds, turn MULTI JOG to select thedesired DSP mode.

The “ DSP” and “ S” (surround speakers) indicators light up.

DISCOHALL LIVE CHURCHMOVIE

When the music source is monaural

The DSP system may not work ef fectively depending on the DSP

 

 

mode selected.

En

 

To cancel the selected mode

 

 

Press DSP to display the DSP mode name, and press the button again within 6 seconds. “ DSP OFF” appears on the display .

To select with the remote control

1

Press DSP.

2

Within 6 seconds, press JOG + or - repeatedly until the

 

desired DSP mode is displayed.

NOTE

•DSP cannot be turned on when the surround speakers are set to“ NONE”.

•DSP is automatically canceled when SURROUND is turned on, and vice versa.

SOUND ADJUSTMENT DURING

RECORDING

The output volume and tone of the speakers or headphones may be freely varied without af fecting the level of the recording.

1

Press TONE repeatedly to select BASS or TREBLE.

 

2

Press JOG +or -to adjust the bass or treble level.

9

 

ENGLISH