Power Supply
IMPORTANT
Make sure that FUNCTION is set to (!) STANDBY P~WER/ TAPE before connecting the AC cord or inserting batteries.
Connect the AC cord as illustrated below.
supplied AC cord \~+ | @ tO ,an AC outlet |
CAUTION
Use only the supplied AC cord. Use with other cords may result in the risk of fire.
Open the lid of the battery compartment on the rear and insert eight RI 4 (size C) batteries, not supplied, with the 0 and O marks correctly aligned. Then close the lid.
To switch from AC power supply to battery power
supply, disconnect the AC cord from the AC inlet.
When to replace the batteries
The Ol”E/BATT indicator becomes dim, the tape speed slows down, volume decreases, or sound is distorted during operation.
Notes on batteries
●Do not mix different types of batteries or old batteries with new ones.
●When the unit is not to be used for a long period, remove the batteries to prevent needless battery wear
●Never recharge the batteries, apply heat to them or take them apart.
●Remove dead batteries.
If Iiquici leaks from the batteries, wipe thoroughly to remove.
To turn off the unit, set FUNCTION to (!) STANDBY POWER so that the OPE/BATT indicator gee!> out.
If an erroneous display or malfunction occurs,
disconnect the AC cord and remove all the batteries to turn off the display. Then turn the power back on.
Maintenance
To clean the cabinet
Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner.
To clean the heads and tape paths
After every 10 hours of use, clean the heads 0 and 0, the pinchroller 0 and capstan 0. Use a cotton swab @ slightly moistened with cleaning fluid or denatured alcohol.
To clean | the lens | Lens |
Use a cotton swab slightly | ||
moistened | with cleaning | fluid. |
Wipe gently from the center to the edge.
ENGLISH 3
