C TAPE OPERATION
•Use Type I (normal) tapes only.
•The unit plays (records on) the side facing up.
PLAYBACK
1 Press TAPE.
The power is turned on.
2 Press PUSH EJECT to open the cassette holder and insert a tape with the side to be played facing up and the exposed side facing forward.
PUSH EJECT 
Press PUSH EJECT to close.
3 Press e PLAY/PAUSE to start playback.
Tape counter
To set the tape counter to “0000”
Press s in stop mode. The counter is also set to “0000” when opening the cassette holder.
s STOP/SET/CLEAR * – Stops play. * or s STOP on the remote control
e PLAY/PAUSE – Pauses play. During pause mode, the tape counter flashes. To resume play, press again.
f/g – Rewinds/ fast forwards. To stop the winding, press s.
After listening, press POWER 6 STANDBY/ON to turn the power off.
RECORDING
1 Insert a tape with the side to be recorded on facing up and the exposed side facing forward.
2 Get ready to record from the source.
To record from a CD, press CD and load the disc. To record from a radio broadcast, press
RADIO BAND and tune to a station.
3 Press w REC.
The unit enters recording pause mode and “REC” flashes slowly in the display.
4 Press e to start recording.
“REC” lights up in the display.
When the selected function is CD, CD play and recording starts simultaneously.
To record only the selected tracks of a CD
1Follow steps 1 to 4 of PROGRAMMED PLAY on page 9 to program tracks.
2Press w.
3Press e.
To stop recording, press s.
To pause recording (only when the source is RADIO), press e. During recording pause mode, “REC” flashes slowly. To resume, press it again.
To erase recording, press TAPE and start recording (press w then e).
After recording, press POWER 6 STANDBY/ON to turn the power off.
10ENGLISH
