SETTING THE SLEEP TIMER
The unit can be turned off automatically at a specified time.
1
2
Hold down REPEAT/MODE/SLEEP * until “SLEEP” flashes in the display.
* or MODE on the remote control
Within 4 seconds, press f or gto specify the time until the power is turned off.
Each time it is pressed, the time changes between 10 and 180 minutes in
Specified time
While the sleep timer works, “SLEEP” is displayed.
To check the time remaining until the power is turned off
Repeat step 1 shown above. The remaining time is displayed for 4 seconds.
To cancel the sleep timer
Repeat step 1 to display the remaining time and hold down REPEAT/MODE/SLEEP again until “OFF” is displayed.
Simple sleep timer setting
Press REPEAT/MODE/SLEEP while the power is off. The unit is turned on with the last function, and the sleep timer is automatically turned on with the
Select the function, if you need, and start playback.
To prevent accidental erasure
Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording.
To record on the tape again
Cover the tab openings with adhesive tape, etc.
Side A
Tab for side A
ENGLISH 11