PROGRAMMED PLAY

Up to 30 tracks can be programmed from the disc.

1 In stop mode, hold down s STOP/SET/

CLEAR* until “M” flashes in the display.

The program number, “P-01” is also displayed. * or s STOP on the remote control

2 Press f or g to select a track, then press s to store it.

Selected track number

Total playing time of

Next program number

the selected tracks

 

Pressing the numbered buttons 0-9 and +10 on the remote control selects and stores the track at the same time.

3 Repeat step 2 to program other tracks.

4 Hold down s to finish the program.

Total number and total playing time of the selected tracks are displayed.

Total playing time of the selected tracks

Total number of the selected tracks

Pressing e finishes the program and starts programmed play.

To check the program, press f or g.

To clear the program, press s once in stop mode so that “M” disappears in the display.

To change the programmed tracks, clear the program and repeat all the steps again.

NOTE

The total playing time of the selected tracks will be

displayed as “

”:

-When it exceeds “99:59”.

-When a track number 31 or higher is selected.

REPEAT, RANDOM PLAY

A single track or all tracks can be played repeatedly, and all the tracks randomly. Random play can be repeated as well.

Press REPEAT/MODE/SLEEP * repeatedly. The mode changes as follows:

: Repeats a single track. Select a track with f or g.

: Repeats all the tracks.

RANDOM: Plays all the tracks randomly.

RANDOM and : Plays all the tracks repeatedly in random order.

To cancel, press the button repeatedly so that and/ or RANDOM disappears.

* or REPEAT on the remote control

NOTE

During random play, you cannot skip back to the previous track with f.

When selecting a track with the numbered buttons, random play is canceled.

During programmed play, you cannot select

RANDOM and .

ENGLISH 9

Page 9
Image 9
Aiwa CSD-FD88, CSD-FD99 Programmed Play, REPEAT, Random Play, Press f or g to select a track, then press s to store it