PROGRAMMED EDIT RECORDING

3,7,8,9

5

4,5

3,7,8,9

u

Programmed edit function enables CD recording while checking the remaining time on each side of the tape as the tracks are programmed.

EEn3

The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the beginning of either side.

1 Insert the tape into deck 2.

Insert the tape with the side to be recorded on first facing out from the unit.

2Press the CD button and load the disc(s).

3Press the EDIT/CHECK button twice while pressing the SHIFT button on the remote control.

“EDIT and “PRGM”lights up on the display.

4 Press the numbered buttons on the remote control to designate the tape length.

10 to 99 minutes can be specified.

 

Maximum recording

Tape length

time for side A

Tape side A (front side)

5Press the one of the DISC DIRECT PLAY buttons to select a disc.

Then, press the numbered buttons and the + 10 button on the remote control to program a track.

Example: To select the 10th track of disc 2, press the DISC DIRECT PLAY 2 button, then press the + 10 and O buttons.

6Repeat step 5 for the rest of the tracks for side A,, A track whose playing time is longer than the remaining time cannot be programmed.

Remaining time of side A

4

Total number

Programmed

of programmed

tracks

tracks

 

7Press the EDIT/CHECK button while pressing the SHIFT button on the remote control to select side B and program the tracks for side B.

After confirming B on the display, repeat step 5.

8Press the EDIT/CHECK button while pressing the SHIFT button to select side A and press the @ REC/REC MUTE button to start recording.

CD play and recording of edited tracks for the first side start simultaneously. When the last truck programmed for side A, deck 2 enters the recording stop mode. After entering the recording stop mode, go to step 9.

9Press the EDIT/CHECK while pressing the SHIFT button on the remote control for recording olf the second side.

B is displayed.

10 Turn over the tape in deck 2 and press the @REC/REC MUTE button to start recording.

Recording starts.

To stop recording

Press the ❑ button. Recording and CD play stop simultaneously.

To check the order of the programmed track numbers

Before recording, press the EDIT/CHECK button while pressing the SHIFT button on the remote control to select side A or B, and

press the + or - button repeatedly.

Program number

Track numberProgrammed track numbers

To change the program of each side

Press the EDIT/CHECK button while pressing the SHIFT button on the remote control to select side A or B, and press the W CLEAR button to clear the program of the selected side. Then program tracks again.

To clear the edit program

Press the ■ button twice so that “EDIT disappears on the display.

Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.

ENGLISH 1 ‘t