CONNECTING OPTIONALEQUIPMENT

\

ml CD DIGITAL OUT

w(OpT’cAL)

0.

~’

g’ In’

9* VIDEO/AUX

 

 

● *

I

SURROUND

 

 

=

 

SPEAKERS

 

 

 

 

w,

fi

1

I

SUPER

 

 

 

 

 

 

 

WOOFER

Refer to the operating instructions of the connected equipment for details.

o The connecting cords are not supplied, Obtain the necessary connecting cords.

o Consult your local Aiwa dealer for optional equipment.

Vl13E0/AUX JACK

This unit can input analog sound signals through these jacks. Use a cable with RCA phono plugs to connect audio equipment (turntables, LD players, MD players, VCRs, TV, etc.).

Connect the red plug to the R jack, and the white plug to the L jack.

When connecting a turntable

Use an Aiwa turntable equipped with a built-in equalizer amplifier.

CD DIGITAL OUT (OPTICAL) JACK

This unit can output CD digital sound signals through this jack, Use an optical cable to connect digital audio equipment (digital amplifier, DAT deck, MD recorder, etc.).

Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL) jack. Then, connect an optical cable plug to the CD DIGITAL OUT (OPTICAL) jack.

When the CD DIGITAL OUT (OPTICAL) jack is not being used

Attach the supplied dust cap.

SUPER WOOFER d JACK

Connect an optional powered sub woofer with a built-in-amplifier to the jack.

LISTENING TO EXTERNALSOURCES

POWER

1

To play equipment connected to the VIDEO/AUX jacks proceed as follows,

1 Press the VIDEO/AUX button.

VIDEO appears on the display.

2 Play the connected equipment.
To change a source name in the display

When the VIDEO/AUX button is pressed, VIDEO is displayed initially. It can be changed to AUX or TV.

With the power on, press the POWER button while pressing the VIDEO/AUX button.

Repeat the procedure to select one of the names.

To adjust the sound level of the external source

When the sound level of the external source is much higher or much lower than that of other function sources, adjust it as follows,

1Press the VIDEO/AUX button and play the equipment,

2Presss the + or _ button so that the sound level becomes the same as that of other function sources.

I:) ENGLISH