Aiwa CX-NA31 manual Loading Discs, Playing Discs

BASIC	OPERATIONS
= OPEN/CLOSE		EDIT/CHECK		RANDOM/
DISC CHANGE			—.
				REPEAT
		.-
CD	..l-----	-.	cl
	H’ ,—’	; .!3D ...- ---c1

9U

DISC DIRECT PLAY

LOADING DISCS

Press the CD button, then press the 4 OPEN/ CLOSE button to open the disc compartment. Load disc(s) with the label side up,

To play one or two discs, place the discs on tray 1 and 2. To play three discs, press the DISC CHANGE button to rotate the trays after placing two discs. Place the third disc on tray 3. Close the disc compartment by pressing the = OPEN/CLOSE button.

Tray 1

		CHANGE
Tray	number of the
disc	to be played	Total playing time

I

Total number of tracks

PLAYING DISCS

Load discs.

To play all discs in the disc compartment, press the

>button.

Play begins with the disc on tray 1.

To play one disc only, press one of the DISC DIRECT PLAY buttons.

The selected disc is played once.

To stop play, press the ■ button.

To pause play, press the II button. To resume play, press again. To search for a particular point during playback, keep the

+or - button pressed and release the button at the desired

point.

To skip to the beginning of a track during playback, press

the + or - button repeatedly.

To remove discs, press the A OPEN/CLOSE button.

To start play when the power is off (Direct Play Function)

Press the CD button. The power is turned on and play of the loaded disc(s) begins.

When the 4 OPEN/CLOSE button is pressed the power is also turned on.

To check the remaining time

During play, press the EDIT/CHECK button on the remote control while pressing the SHIFT botton. The amount of time remaining

until all tracks finish playing is displayed. To restore the playing ‘ time display, repeat the above again.

Selecting a track with the remote control

1Press one of the DISC DIRECT PLAY buttons to select a disc.

2Press the numbered buttons and the +10 button to select a track.

Example: -

To select the 25th track, press the +10, +10 and 5 buttons. To select the 10th track, press the +1 O and O buttons.

The selected track starts to play and continues to the end of that disc.

Replacing discs during play

While one disc is playing, the other discs can be replaced without

interrupting play.

1 Press the DISC CHANGE button.

2Remove the discs and replace with other discs.

3Press the A OPEN/CLOSE button to close the disc compartment,

m

●When loading an 8-cm (3-inch) disc, put it onto the inner circle of the tray.

●Do not place more than one compact disc on one disc tray.

●Do not tilt the unit with discs loaded. Doing so may cause malfunctions.

.

*

Elapsed playing time

Number of track

11ENGLISH