PROGRAMMED EDIT RECORDING
6Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time cannot be programmed.
Remaining time of side A
Programmed edit function enables CD recording while checking the remaining time on each side of the tape as the tracks are programmed.
The programmed edit recording will not start from a point halfway in the tape, The tape must be recorded from the beginning of either side.
1 Insert the tape into deck 2.
Insert the tape with the side to be recorded on first facing out frclm the unit,
2Press the CD button and load the disc(s).
3Press the EDIT/CHECK button twice while
pressing the SHIFT button on the remote control.
4 Plress the numbered buttons on the remote control to designate the tape length.
1Clto 99 minutes can be specified.
| Maximum | recording |
Tape length | time for | side A |
I |
| I |
Tape side A (front side)
5 Press the one of the DISC DIRECT PLAY buttons tc~select a disc.
Tlhen, press the numbered buttons and the + 10 button on the remote control to program a track.
Example: To select the 10th track of disc 2, press the DISC DIRECT PLAY 2 button, then press the + 10 and O buttons.
Total number Programmed
of programmed tracks tracks
7Press the EDIT/CHECK button while pressing the SHIFT button on the remote control to select side
B and program the tracks for side B.
After confirming B on the display, repeat step 5,
Tape side B (reverse side)
8Press the EDIT/CHECK button while pressing the SHIFT button to select side A and press the O
REC/REC MUTE button to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the last track programmed for side A is finished, deck 2 enters the recording stop mode. After entering the recording stop mode, go to step 9.
9Press the EDIT/CHECK while pressing the SHIFT button on the remote control for recording of
the second side.
“B”is displayed.
10 Turn over the tape in deck 2 and press the . REC/REC MUTE button to start recording.
Recording starts.
To stop recording
Press the ■ button, Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press the EDIT/CHECK button while pressing the SHIFT button on the remote control to select side A or B, and press the 44 or ›~ button repeatedly.
Program number
Track number | Programmed |
| track numbers |
To change the program of each side
Press the EDIT/CHECK button while pressing the SHIFT button on the remote control to select side A or B, and press the ❑ CLEAR button to clear the program of the selected side. Then program tracks again.
To clear the edit program
Press the ■ button twice so that “EDIT disappears on the display.
