Aiwa Creating your own program, — Program Play, 13GB, Press N, 5 Press ENTER, Play – CD/MP3, Other Operations, Program additional tracks

Press CD (or FUNCTION repeatedly) to switch the function to CD.

Press PLAY MODE repeatedly in stop mode until “PGM” appears.

Creating your own program

— Program Play

You can make a program of up to 25 steps from all the discs in the order you want to play them. You can synchro record the programmed tracks onto a cassette tape (page 19).

MP3 audio tracks cannot be played on JAX- N44/S44.

1

2

3 Press DISC SKIP (or DISC 1 – 3 or DISC SKIP/EX-CHANGE on the unit) to select a disc.

4 Press . or > repeatedly (or turn

AMS operation dial on the unit) until the desired track number appears.

When programming the MP3 audio tracks, press ALBUM – or + to select album, then press . or > repeatedly (or turn AMS operation dial on the unit) until the desired track number appears.

Disc tray number Selected track number

Total playing time (including selected track)

5 Press ENTER.

The track is programmed.

The program step number appears, followed by the total playing time.

6	Program additional tracks.
	To program	Repeat steps
	Other tracks on the 4 and 5
	same disc
	Other tracks on	3 to 5
	other discs
7
	Press N.
	Program Play starts.
Other Operations
To		Do this
Cancel Program		Press PLAY MODE repeatedly
Play		in stop mode until “PGM”
		disappears.
Clear a track from		Press CLEAR in stop mode.
the end

Tips

•The program you made remains after Program Play finishes. To play the same program again, press CD (or FUNCTION repeatedly) to switch the function to CD, then press N. However, the program is cleared when you open the disc tray.

•“– –.– –” appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over, or when you select an MP3 audio track.

Play – CD/MP3

13GB