Listening to audio from a connected component
Use buttons on the unit for the operation.
Listening to a connected VCR1Connect the audio cords.
See “Hooking up optional components” on page 27.
2Press VIDEO/MD.
Start playing the connected component.
Listening to a connected MD deck1Connect the audio cords.
See “Hooking up optional components” on page 27.
2Press VIDEO/MD.
Hold down VIDEO/MD and press ?/1. This switches the VIDEO function to MD. Once you enable the MD function, just press VIDEO/MD.
Notes
•If you cannot select “VIDEO” when you press VIDEO/MD, press ?/1 while holding down VIDEO/MD when the system is on. “MD” will be switched to “VIDEO”. To return to “MD”, do the same procedure.
•When you connect a VIDEO CD deck, set to “MD”.
28GB