Aiwa MF-350 manual Search Procedure, Example to search for your Television Code

Search Procedure

If your device does not respond to the MF-350 universal remote after you have tried all the codes listed for your brand, you may need to search for your code. This method may also work if your brand is not listed at all.

Example: to search for your Television Code:

1.Switch your Television on (not on standby).

2.Press the TV key on your MF-350.

3.Press and hold down the SETUP key until the red light (LED under device key) on the MF-350 blinks twice.

4. Press 9 9 1, the red light will blink twice.

5.Next, press POWER.

6.Aim the MF-350 at your Television. Now press CH+

over and over, until your Television turns off (every time you press the CH+ key the MF-350 will send out a POWER signal from the next code contained in the memory). You may have to press this key many times (up to 150 times) so please be patient.

If you skip past a code, you can go to the previous code(s) by pressing the CH- key. Remember to keep pointing the MF-350 at your Television while pressing this key.

7. As soon as your television turns off, press SETUP to store the code.

-Most TV’s do not switch on pressing the POWER key. Please try pressing a “number” key to switch your TV back on.

-If you cannot control your Television properly, please continue the Search Procedure, you may be using the wrong Code.

-To search for the code for another device follow the instructions above only press the appropriate device key instead of TV during step 2.

-If the original remote control of your Video recorder or DVD player does not have a POWER key, press PLAY instead of POWER during step 5.

20