Aiwa MF-350 manual Problems and Troubleshooting

Problems and Troubleshooting

*Red light (LED under device key) does not blink when you press a key?

- Replace batteries with 2 fresh, new AAA alkaline batteries.

* The MF-350 does not respond after pressing a key?

-Make sure you are using new batteries and are pointing the MF-350 at your device.

*The MF-350 does not operate your device(s)? - A) Try all the codes listed for your brand.

B)Try the Code Procedure on page 20.

*Your brand is not listed in the MF-350 code section? - Try the Code Procedure on page 20.

*The MF-350 is not performing commands properly?

-You may be using the wrong code. Try repeating the Direct Set-Up using another code listed under your brand or start the search Procedure over again to locate the proper code.

* Problems changing channels?

-Enter the channel number exactly as you would on your original remote.

* Is the VCR / DVD- are not recording?

-As a safety feature on your MF-350, you must press the Record key twice.

25