Aiwa NSX-A10 manual Loading Discs, Playing Discs, RANDOM/REPEAT Play

BASIC OPERATIONS

LOADING DISCS

Press the CD button, then press the A OPEN/ CLOSE button to open the disc compartment. Load disc(s) with the label side up.

To play one or two discs, place the discs on tray 1 and 2.

To play three discs, press the DISC CHANGE button to rotate the trays after placing two discs. Place the third disc on tr?y 3. Close ttie disc compartment by pressing the A OPEN/CLOSE button.

	DISC CHANGE
	Tray number of the
Total playing time	disc to be played

Total number of tracks

PLAYING DISCS

Load discs.

To play all discs in the disc compartment, press

the P PRESET button.

Play begins with the disc on tray 1.

Elapsed playing time

I

Number of track being played

To play one disc only, press one of the DISC DIRECT PLAY buttons.

The selected disc is played once.

To stop play, press the W CLEAR-buHon.

To pause play, press the 11 SET button. To resume play, press again.

To search for a particular point during playback, keep the

-or FF button m’essed and release the button at the desired point.

To skip to the beginning of a track during playback, press the + or > button repeatedly.

To remove discs, press the 4 OPEN/CLOSE button.

To start play when the power is off (Direct Play Function)

Press the CD button or one of the DISC DIRECT PLAY buttons. The power is turned on and play of the loaded disc(s) begins. To replace discs before play, press the = OPEN/CLOSE button to open the disc compartment.

To check the remaining time

Press the EDIT/CHECK button while pressing the SHIFT button on the remote control during play. The amount of time remaining until all tracks finish playing is displayed. To restore the playtime display, repeat the above again.

Selecting a track with the remote control

1Press one of the DISC DIRECT PLAY buttons to select a disc.

2Press the numeric buttons and the +1O button to select a track.

Example:

To select the 25th track, press the +1O, +1O and 5 buttons. To select the 10th track, press the +1O and O buttons.

The selected track starts to play and continues-to the” end of that disc.

Replacing discs during play

While one disc is playing, the other discs can be replaced without interrupting play.

1Press the DISC CHANGE button.

2Remove the discs and replace with other discs.

3Press the ~ OPEN/CLOSE button to close the disc compartment.

m

●When loading an 8-cm (3-inch) disc, put it onto the inner circle

of the tray.

* Do not place more than one compact disc on one disc tray.

●Do not tilt the unit with discs loaded.’ Doi,ng so may cause malfunctions.

RANDOM/REPEAT PLAY

Use the remote control.

Press the RANDOM/REPEAT button while pressing the SHIFT button.

Each time it is pressed, the function can be selected cyclically.

@RANDOM play – RANDOM lights up on the display.

All the tracks on the selected disc or on all the discs can be played randomly.

@REPEAT play — ~’ lights up on the display.

A single disc or all the discs can be played repeatedly.

@RANDOM/REPEAT play — RANDOM and ~ light up on the display.

@Cancel — RANDOM and% go out from the display.

m

During random play, following operations are nOt possible:

-to select the tracks directly with the numbered buttons.

-to skip to the previously played tracks with the < button.

7 ENGLISH