PRESETTING STATIONS
The unit can store a total of 32 preset stations. When a station is stored, a preset number is assigned to the station. Use the preset number to tune in to a preset station directly.
1Press TUNER BAND to select a band, and press f DOWN or g UP to select a station.
2Press a SET to store the station.
A preset number beginning from 1 in consecutive order for each band is assigned to the station.
Frequency Preset number
3Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations for all the bands have already been stored.
“FULL” is displayed if you attempt to store more than 32 preset stations.
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1Press BAND while pressing SHIFT to select a band.
2Press numbered buttons 0-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +10, +10 and 0. To select preset number 15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER BAND to select a band.Then, press crepeatedly or turn MULTI JOG.
Each time cis pressed, the next ascending number is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press s CLEAR, and press a SET within 4 seconds.
The preset numbers of all other stations in the band with higher numbers are also decreased by one.
