Aiwa NSX-AJ500 Timer recording, To display the timer setting, To change the timer setting

To display the timer setting

Press TIMER.

The timer-on time, the source and the timer-activated duration are displayed for 6 seconds.

Tip:

Timer setting can be displayed even while the unit is turned off, and at that time if you press ENTER or awithin 6 seconds after TIMER is pressed, you can enter the timer setting mode and change the setting.

To change the timer setting

Re-set the timer again.

To cancel the timer

Press TIMER repeatedly until " OFF" is displayed. "5" disappears from the display.

Tip:

Your timer setting is retained even if the timer is canceled. Next time the timer is activated, you can change your previous setting, or simply use the same setting again.

Timer recording

Timer recording is available only for TUNER and VIDEO/AUX (with an external timer) sources.

1Press either TUNER/BAND or VIDEO/AUX to select a source.

2 Press TIMER repeatedly until "5REC" appears	En
on the display.

3Carry out step 3 to step 5 described in "Timer playback".

4Prepare the source.

To record the radio, select the band and tune in to the desired station.

To record external equipment connected to the VIDEO/ AUX jacks, set an external timer for the equipment so that its playback begins at the same time.

5Insert the recording tape in DECK 2 and then turn the unit off.

19

01NSX-AJ500/AJ503(U)/Eng 19 12/22/00, 3:51 PM