PREPARATIONS
Connection
Plug in the AC power cord to the AC power outlet after all other connections are made.
1Connect the front speakers.
3Connect the supplied antennas.
Connect the FM antenna to the FM 75 Ω terminals and the AM antenna to the AM LOOP terminals.
FM antenna
To position the surround speakers (only for NSX- AJ503)
Position the surround speakers behind the listening area to make the most of the surround effect.
| Connect the right front speaker to the SPEAKERS R |
En | terminals and the left to the SPEAKERS L terminals. The |
speaker cords with the white stripes go to the 0terminals. |
2Connect the surround speakers (only for NSX- AJ503).
Connect each surround speaker cord to the SURROUND SPEAKERS R jack or the SURROUND SPEAKERS L jack.
AM antenna
4Connect the AC power cord to an AC outlet. When the AC power cord is connected to an AC outlet for the first time, DEMO appears on the display.
To deactivate the DEMO, press DEMO/ECO.
•Do not
•Do not leave objects generating magnetism or objects affected by magnetism near the speakers.
To mount the surround speakers on the wall (only for NSX-AJ503)
Mount each speaker on a spot that can hold its weight.
AIWA disclaims any responsibility for injury to persons or other accidents caused by not fitting the surround speakers properly or if the place of the installation is not suitable.
4
4 | 12/22/00, 3:51 PM |
