Programmed playback
Plays back up to 30 selected tracks in programmed order.
1Press SHIFT+PRGM on the remote control during stop.
"PRGM" lights up on the display.
2Press DISC DIRECT PLAY
3Press the numbered buttons on the remote control to program a track.
The selected track number lights up on the display.
4Repeat step 2 and 3 to program other tracks.
5Press d.
•During programmed playback, you cannot select a disc or a track with the numbered buttons. "Can't USE" is displayed when you try to select a track .
•If the total playback time of the program exceeds 99:59 minutes, or if a track with a track number exceeding 30 is programmed, the playing time is displayed as "-
•You cannot program more than 30 tracks. "FULL" is displayed.
To check the program
Press for grepeatedly during stop. The disc number, track number and program number are displayed in succession.
To clear the program
Press sCLEAR during stop. "PRGM" disappears on the display.
To add tracks to the program
Repeat step 2 and 3 before starting playback. The tracks are added to the end of the program.
To change the programmed tracks
Clear the program and reselect the tracks in your desired order.
Blank skip play
Skips the silent portion between tracks on the disc.
1Press CD BLANK SKIP.
"CD BLANK SKIP ON" is displayed and "
" appears on the display.
2Press d.
•There may be a case where Blank skip play does not function correctly.
•Blank skip play is canceled automatically when recording with program or random function (such as AI Edit Recording) starts.
To cancel Blank skip play
Press CD BLANK SKIP so that "CD BLANK SKIP OFF"
is displayed and "
" disappears.
Notes on CDs |
|
• Do not place more than one disc on one tray. |
|
• Do not tilt the unit with discs loaded. |
|
• The unit may not play a |
|
computers or certain kinds of |
|
• Do not attach adhesive label, etc. to either side of a |
|
RW disc, as doing so may cause malfunction. | En |
• Do not load an unrecorded | |
damaged. |
|
• Do not use |
|
11
