Aiwa NSX-AJ800 manual To change the program of each side, To clear the edit program

En

Programmed Edit Recording

As you program the CD tracks to record, Programmed Edit Recording displays the remaining recording time for each side of the tape, so you can easily select a set of desired tracks within the length of your tape.

1Insert the recording tape in DECK 2.

2 Press CD to select the CD function and load the disc.

3Press CD EDIT/CHECK (SHIFT+CD EDIT/CHECK on the remote control) twice.

The "PRGM" and "EDIT" indicators light up and "PRGMC-00" appears on the display.

4Press the numbered buttons on the remote control to enter the length of the recording tape. 10 to 99 minutes can be specified.

• f, gor MULTI JOG can also be used to specify tape length.

5Press DISC DIRECT PLAY 1-3 to select a disc. Then, press the numbered buttons on the remote control to select the first track to be recorded on side A.

-To select the 25th track, press +10, +10 and 5. -To select the 10th track, press +10 and 0.

6Repeat step 5 to select the rest of the tracks for side A.

The remaining recording time of side A is displayed. You cannot select a track with a longer playing time.

7Press CD EDIT/CHECK to switch to side B and select the tracks for the side.

8Press CD EDIT/CHECK to switch back to side A and press wREC/REC MUTE to start recording on side A.

The tape is rewound to the beginning of side A and recording starts.

Go to the next step when recording on side A finishes.

9Press CD EDIT/CHECK to switch to side B, turn over the tape, and press wREC/REC MUTE to start recording on side B.

•You cannot program more than 30 tracks. "FULL" is displayed.

•You cannot program a track with a track number larger than 30.

•Recording cannot start from a point halfway in the tape.

To stop recording

Press s. Recording and CD playback stop simultaneously.

To check the program

1Before recording, press CD EDIT/CHECK to select side A or B.

2Press f or g repeatedly. The track number and program number are displayed in succession.

To change the program of each side

Press CD EDIT/CHECK to select side A or B, and press sCLEAR to clear the program for the selected side. Then, select tracks again.

To clear the edit program

Press sCLEAR twice so that "EDIT" disappears from the display.

To prevent accidental erasure

Break off the plastic tab of the cassette tape with a screwdriver or other pointed tool. To record on the tape again, cover the detection slot with adhesive tape.

Side A

Tab for side A

16