Aiwa NSX-D30 TIMER OPERATIONS, Sleep timer, Timer playback, PLAY, Press, control), 6Prepare the source, To cancel the sleep timer, To play CD(s), load disc(s)

TIMER OPERATIONS

Sleep timer

Turns off the unit automatically after a specified time.1Press SHIFT+SLEEP on the remote control. "SLP" appears on the display.2Press for grepeatedly to set the sleep timer duration.

With each press, the timer duration changes in 5-minute steps between 5 to 240 minutes. If there is no button input for 4 seconds, the current setting is entered automatically. The unit turns off after the selected time.

•MULTI JOG is also available in place of for g.

Tip:

The display is dimmed while the sleep timer is active.To check the remaining time until the unit turns off

Press SHIFT+SLEEP on the remote control. The remaining time is displayed for 4 seconds.

To cancel the sleep timerPress SHIFT+SLEEP twice on the remote control so that "SLP OFF" is displayed.

Timer playback

Turns on the unit at a specified time for the specified duration. Make sure the clock is set correctly.

1Press TIMER (SHIFT+TIMER on the remotecontrol).

"5" indicator lights up and " PLAY" appears on the display. Then, the timer-on time and the source name appear alternately on the display.

2Press for gto set the timer-on time, then press aSET or ENTER.

If for gis not pressed within 6 seconds, you will exit the timer setting mode and the previous setting, however, is entered.

3Press f or g to select the source, then press aSET or ENTER.4Press f or g to set the timer-activated duration, then press aSET or ENTER.

With each press, the timer-activated duration changes in 5-minute steps between 5 to 240 minutes.

5Press f or g to adjust the volume level for timed playback, then press aSET or ENTER. Adjustable range: 0 to 16

6Prepare the source.To play CD(s), load disc(s).To play the radio, select the band and tune in to the desired station.To play a tape, insert the tape and select the deck.

To play external equipment connected to the VIDEO/AUX jacks, set an external timer for the equipment so that its playback begins at the same time.

7Press POWER 6STANDBY/ON to turn the unit off.

At timer-on time, the unit turns on and plays the selected source. After the specified timer-activated duration, the unit turns off again.

Tip:

The display is dimmed while the timer playback is active.

•To stop timer setting in steps 2 to 5, press s. Timer standby mode is also canceled.

•Timer playback will not begin unless the unit is turned off first.

•Connected equipment cannot be turned on or off by the builtin timer of this unit. Use an external timer.

•MULTI JOG is also available in place of for g. •In step 3, TAPE, TUNER, VIDEO/AUX, CD or FUNCTION is

also available to select the source.In step 5, VOLUME+,-or VOLUME is also available to adjust the volume level.