ENGLISH

B
12
IPLAYBACK I
Pull out the rubber cap and connect the supplied headphones to the
PHONES/LINE OUT jack.
The amplified speaker system can be connected instead to enjoy the CD sound.
1 Release HOLD.
2 Place a disc.
3 Press ePLAY/PAUSE.
Playback starts from the first track.
atrack number
belapsed playing time
cvolume indicator
Basic operation
E•A•S•S 3× (Electronic Anti-Shock System) J
The EASS 3× function reduces skipping or muting of the sound when the unit is
subjected to shocks.
The player keeps about 48 seconds or 12 seconds of playback sound in its memory.
When you start playback, the unit keeps 48 seconds in memory.
To keep 12 seconds in the memory, press EASS repeatedly until and
appear.
To cancel the E•A•S•S 3× function, press EASS repeatedly until EASS
appears.
Note
Before jogging with this unit, allow sufficient time for the memory buffer to fill up
completely (ideally about 20 seconds).
Continuous shock or vibration may cause the sound to be interrupted even if the
EASS 3× function is activated. This is normal and not a malfunction. Should
you experience an interruption in sound, stabilize the unit for a few seconds,
then resume your activity.
When the EASS 3× function is activated, motor noise is heard as the motor
periodically rotates at high speed during playback. This is not a malfunction.
When EASS is pressed, the unit will pause for about 2 seconds.
When the unit is set to EASS-off or -12 second mode, the quality of the sound
will be better than EASS-48 second mode.
Resume function K
Set the HOLD switch to RESUME.
appears, and you can start playback from the point where you stopped
playback by pressing sSTOP/OFF/CHARGE.
When the resume function is on, all-track repeat is selected automatically.
To cancel resume play, set the HOLD switch to OFF.
Note
Resume play may start at a point about 30 seconds behind or ahead the stopped
point. Resume play may not operate if you stopped at the last 30 seconds of the
final track.
Resume play will be canceled if you open the disc compartment. If the unit is
turned off, resume play will not be canceled. In this case, be sure to set the
HOLD switch to OFF before changing discs.
Random play L
Press PLAY MODE in standby mode to display .
Tracks on the disc are played in random order.
To cancel random play, press PLAY MODE in standby mode.
display changes to .
Note
You cannot back to previous track by pressing r during random play.
You cannot select one-track repeat during random play.
Repeat play L
Press PLAY MODE during playback to select repeat play as follows.
: one-track repeat
V
: all-track repeat
V
no repeat play (normal play)
Note
When the unit is set to EASS-12 or -48 second mode, if PLAY MODE is pressed
at the end of the track to select the other play mode, the unit may not change to the
other mode properly.

CONNECTING TO AN EXTERNAL UNIT M

Use a commercially available connection cord which has a 3.5 ø stereo mini-plug
3
JK
To stop
To pause
To search for the beginning of a track
To locate a desired passage
Press sSTOP/OFF/CHARGE.
Press ePLAY/PAUSE.
To resume, press it again.
Press r or t.
Keep r or t pressed.
Release the button at the start of desired
passage.
L