Playing back with the software specific menu (DVDs and VCDs only)

This unit supports the menu interface of DVDs, and VCDs with PBC. The menu screen may be displayed automatically when the disc is loaded.

Use the remote control.En DVDs1Press vVBbto select your desired program.2Press ENTER to begin playback.To display the menuPress TITLE or MENU during playback or stop.VCDsTo select a program from the menuPress the number button(s) to select your desired program.

To display the menu

Press RETURN.

•For some DVDs you can select the menu language out of the ones available. See “Disc Menu”, page 33.

•Contents and operation of the software specific menu vary with the disc. Follow the instructions on the disc and on the menu screen.

Stopping and pausingTo stop playbackPress s.Playback stops. The unit remembers the point at which playback stopped.

To resume playback from the point where it stopped

Press c.

“RESUME” appears on the TV display and playback starts where it last stopped (Resume function).

To clear the point to be resumedPress sagain during stop.

“RESUME OFF” appears on the TV display. The resume memory is cleared, and playback starts at the beginning of the disc when cis pressed.

Notes on the resume function

•The point to be resumed is also cleared when the disc tray is opened, the current disc is switched, the power is turned off, or the function is switched.

•The resume function is not available for PBC playback of VCDs. To turn off PBC, see “Disabling PBC” below.

To pause playbackPress a.To resume playback, press c.
Disabling PBC (VCD only)Press SHIFT+PBC on the remote control."PBC" disappears from the display, and the menu playback feature is disabled.

•With PBC disabled, VCDs are played just like audio CDs. This allows you, for example, to use repeat playback and programmed playback for VCDs with PBC.

•If PBC is pressed during playback, playback stops. •See also “Types of VCDs”, page 14.

16