PLAYING DISCS—STATUS DISPLAY
En
Various disc playback status information can be displayed on the unit's display and on the TV screen.
On the unit’s display
Press SETUP repeatedly during playback.DISPLAY on the unit is also available.With each press, the playback time display changes as follows: Audio and Video CDs
-Number and elapsed time of current track-Number and remaining time of current track-Elapsed time of disc-Remaining time of discDVDs
-Number and elapsed time of current title-Number and remaining time of current title-Number and elapsed time of current chapter-Number and remaining time of current chapter•Playback time information cannot be changed during random playback.•In some discs, playback time information may not be displayed correctly during programmed playback.
•Playback time information display is not available for VCDs with PBC.On the TV
Press ON SCREEN DISPLAY repeatedly.Various playback status information appear on the TV screen along with icons that indicate the type of information.
Common to all types of discsshows the elapsed playing time during playback; total playing time or the playback resume point during stop
shows the repeat mode statusAudio and video CDs onlyshows the track numbershows the program/ random playback mode status
shows if PBC is on or off (VCD only)hD: Dolby Digital signal. The numbers below indicate the number of front and rear audio channels. For example,
“2/0” = [Conventional stereo] two front channels (left and right) and no rear channel
“3/2.1”
LPCM: Linear PCM signal. The sampling frequency and the D/A conversion bits are displayed below, such as
KARAOKE: Karaoke signal. The currently active vocal track is displayed below, such as “VOCAL 1 + 2”. MPEG: MPEG audio signal.
shows the current angle number out of the available number of anglesshows the current subtitle number out of the available number of subtitlesshows the occupied mark memory numbers22