PREPARATIONS
| Connection |
| Plug in the AC power cord to the AC outlet after all other |
| connections are made. |
| 1 Connect the speakers to the main unit. |
| Connect the right speaker to the SPEAKERS R terminals |
En | and the left to the SPEAKERS L terminals. The speaker |
cords with the stripes go to the 0terminals. |
2Connect the supplied antennas.
Connect the FM antenna to the FM 75 Ω terminals and the AM antenna to the AM LOOP jack. Connect the FM antenna to the FM 75 Ω terminals without the 2mark, as illustrated.
FM antenna
AM antenna
3Connect the AC power cord to an AC outlet. The clock will flash on the display.
For setting the clock, see page 7.
Speakers
•Do not
affected by magnetism near the speakers.
Antennas
Keep antennas away from metallic objects, electrical equipment and cords.
•FM antenna: Extend fully and position for the best
reception. If reception is poor, connect an optional outdoor antenna to the FM 75 Ω terminals. When connecting an optional outdoor antenna, be sure to connect the shield braid of the antenna to the 2terminal.
•AM antenna: Rotate to find best reception.
Remote control
Detach the battery compartment lid at the rear of the remote control and insert two R6 (size AA) batteries with correct polarity.
R6(AA)
•Replace the batteries with new ones when the operational distance between the remote control and main unit becomes shorter.
•Remove the batteries if the unit is not going to be used for an extended period of time.
•The remote control may not operate if it is used under intense sunlight or if its line of sight is obstructed.
4
