Aiwa XR-EM20 manual Timer Operations, Sleep timer, Timer playback

TIMER OPERATIONS

	POWER
	TIMER	SLEEP
POWER
6STANDBY/ON	TONE
En
	f,g
s		f,g
	SET
	SHIFT

5	Press f or g to set the timer-activated
	duration, then press SET.
	With each press, the timer-activated duration changes in
	5-minute steps between 5 to 240 minutes.
6	Press for gto adjust the volume for timer
	playback, and press SET.
	The volume level can be adjusted from 0 to 16.
7	Prepare the source.
	To play CD, load a disc.
	To play a tape, insert the tape.
	To play the radio, select the band and tune in the desired
	station.
	To play external equipment connected to the AUX IN jacks,
	set an external timer for the equipment so that its playback

Sleep timer

Turns off the unit automatically after a specified time.

1Hold down SHIFT and press SLEEP on the remote control.

"5" and "SLP" is displayed.

2Within 6 seconds, press for grepeatedly to set the sleep timer duration.

With each press, the timer duration changes in 5-minute steps between 5 to 240 minutes. If there is no button input for 6 seconds, the current setting is entered automatically. The unit turns off after the selected time.

To check the remaining time until the unit turns off Hold down SHIFT and press SLEEP on the remote control. The remaining time is displayed for 6 seconds.

Timer playback

Turns on the unit at a specified time for the specified duration. Make sure the clock is set correctly.

1Hold down SHIFT and press TIMER on the remote control repeatedly so that "5" and "5 PLAY" is displayed.

2Within 6 seconds, press SET.

3Press for g to set the timer-on time, and press SET.

Each press changes the time in 1-minute steps. Holding these buttons down will vary the time in 10-minute units.

4Press for gto select the source, and press SET.

begins at the same time.

8 Press POWER 6STANDBY/ON (POWER) to turn

the unit off.

"5" remains on the display to indicate the timer standby

mode.

At timer-on time, the unit turns on and plays the selected

source. After the specified timer-activated duration, the

unit turns off again.

•To stop timer setting in steps 3 to 6, press s. Timer standby mode is also canceled.

•Timer playback will not begin unless the unit is turned off first.

•Connected equipment cannot be turned on or off by the built- in timer of this unit. Use an external timer.

To cancel the sleep timer

Hold down SHIFT and press SLEEP on the remote control repeatedly so that "SLP OFF" is displayed.

•For timer play of a CD, select "CD". •For timer play of a tape, select "TP".

•For timer play of a radio broadcast, select "TU". You will select the band later in step 7.

•For timer play of the equipment connected to the AUX IN jacks, select "AUX".

16