RECORDING USING AN EXTERNALTIMER INPUT
Recording can be controlled by an external start/stop
signal input at the EXT TIMER IN terminal.
Example 2: To record using the signal input at
the EXT TIMER IN terminal, in
12-hour mode.
NOTE:
•External timer input recording can only be set on the
9th line (“EXT”) of the (TIMER SET) menu.
1Follow steps 1 to 3 under “PROGRAMME TIMER
RECORDING” on page 17.
2Press the ] button, until “EXT” (External) setting is
flashing.
°
The “SPD” (recording speed) position will start
flashing.
3Press the l (or j) button to select the recording
speed (ex: 12), then press the « button.
°
“N” will start flashing.
4Press the l (or j) button to select “Y”.
5Follow steps H and I under “PROGRAMME
TIMER RECORDING” on page 17.
°
When an external signal is input, “E” will light
on the digital display and recording will take
place.
NOTES:
•Other timer recordings using the standard procedure
can also be programmed.
•When there is a signal being input at the EXT TIMER
IN terminal, “E” will be displayed on the digital display
and recording is conducted.
<TIMER SET>
WEEK START STOP SPD
SUN --:-- --:-- --- N
MON --:-- --:-- --- N
TUE --:-- --:-- --- N
WED --:-- --:-- --- N
THU --:-- --:-- --- N
FRI --:-- --:-- --- N
SAT --:-- --:-- --- N
DLY --:-- --:-- --- N
EXT ¤¤¤¤¤ ¤¤¤¤¤ --- N
9th line
<TIMER SET>
WEEK START STOP SPD
SUN --:-- --:-- --- N
MON --:-- --:-- --- N
TUE --:-- --:-- --- N
WED --:-- --:-- --- N
THU --:-- --:-- --- N
FRI --:-- --:-- --- N
SAT --:-- --:-- --- N
DLY --:-- --:-- --- N
EXT ¤¤¤¤¤ ¤¤¤¤¤ 12 Y
GB
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998
20 English