Dish Network Solo 311 manual Select the Create option to save the event timer

4.Select the Create option to save the event timer.

5.The receiver displays a timer symbol in the Program Guide, and also when you press the INFO button to get information about the program.

SETTING UP A MANUAL EVENT TIMER

1. Press the MENU button.

2.Select the Timers option.

3.Select the Create option. The receiver displays the Create a Manual Event Timer menu.

4.Select a Timer Type option.

5.Select a Timer Frequency option.

6.Select a channel:

•Highlight a channel using the UP or DOWN ARROW button. Then, press the SELECT button.

•Enter a channel number using the number buttons.

7.Select the Set Date/Time option. The receiver displays the Set Date/ Time for Manual Timer menu.

8.Use the NUMBER PAD buttons to enter the Start Time (this includes selecting AM or PM) and the End Time (this includes selecting AM or

PM).

9.Use the NUMBER PAD buttons to enter the Date.

10.Select the Create Timer option.

Using Timers

Tip: You may start any timer one minute early. But if you set back-to- back event timers and the second one starts early, the first one will end early. An event timer cannot start early for a pay per view program. If you try to set a timer for overlapping events, you will get an error message.

Tip: Use the Program Guide or your printed television guide to see when the program(s) starts and stops — before you go to the Set Date/TIme for Manual Timer menu.

Page 37

Page 37