Dish Network Solo 311 manual Before AN Event Timer Operates, Setting UP AN Automatic Event Timer

Chapter 3

Using the System

BEFORE AN EVENT TIMER OPERATES

Five minutes before an event timer operates, the receiver displays a small blinking “clock” symbol on the TV screen. This symbol disappears when the program begins. While the symbol is displayed, you may do either one of the following.

•Press the remote control CANCEL button to clear the symbol from the TV screen. This does not affect the timer; it will operate.

•Press the remote control INFO button to see more information on the event timer. If you do this, you will have the following choices:

Select the OK or Cancel option to continue with the event timer.

Or

Select the Stop Timer or No option to stop the event timer.

Or

Note: This stops only this instance of a Mon.-Fri., Daily or Weekly timer. The timer will operate the next time it is scheduled. To stop all operations of such a timer, you must delete the timer. For a Reminder Event Timer, instead of having the option to stop the timer, you have the option to tune to the program.

SETTING UP AN AUTOMATIC EVENT TIMER

1.Select a future program using the Browse Banner, Themes Menu or the Program Guide.

2.Select a Timer Type option.

3.Select a Timer Frequency option. Notice that a check mark displays in the box.

Page 36