Sanyo TLS-224P AUTOREPEAT RECORDING

AUTOREPEAT RECORDING

Autorepeat Recording

The same tape can be recorded over many times.

1Press the AUDIO ON/MENU button until the (SET

UP 3) menu is displayed.

The “ALARM MODE” setting is flashing.

2Press the ] button, until the “TAPE END MODE”

setting is flashing.

3Press the l (or j) button to set to “R 1” or “R 2”.

(See “Setting the Mode at the End of the Tape”)

4Press the PAUSE/SCAN button, the normal screen

is displayed.

The REPEAT LED will light.

The setting procedure is now completed.

5Press the REC button.

Recording will start. When the tape end is

reached, the VCR will rewind it to the

beginning, and recording will resume.

NOTES:

•If during autorepeat recording there is an alarm

trigger, “AL” is displayed on the digital display and

alarm recording will take place. (Please refer to page

14, “ALARM RECORDING”.)

•If the “TAPE END MODE” setting is R 1, the REPEAT

LED will go off if there is an alarm trigger. The

recording will continue to the end of the tape then it

will be rewound to the beginning and stop. “OFF” will

be displayed on the digital display.

Setting the Mode at the End of the Tape

In the (SET UP 3) menu, you can set the mode of the

VCR mode when the tape reaches the end during

recording.

1Press the AUDIO ON/MENU button until the (SET

UP 3) menu is displayed.

2Press the ] button, until the “TAPE END MODE”

setting is flashing.

3Press the l (or j) button, to set the desired mode.

REW. . . . . . . . . . . Rewinds the tape to the

beginning, then goes to stop

mode

STOP. . . . . . . . . . Goes to stop mode

EJECT . . . . . . . . . The cassette is ejected

R1. . . . . . . . . . . . . The autorepeat mode is

automatically canceled if

there was an alarm trigger

R2. . . . . . . . . . . . . Autorepeat mode is active

even if there was an alarm

trigger

4Press the PAUSE/SCAN button to save the setting

ALARM MODE Y1

ALARM SPEED 3H

ALARM DURATION 20S

TAPE IN MODE STOP

TAPE END MODE REW

TAPE END OUT -3M

CLOG DETECT. Y