Sanyo TLS-224P Normal Recording, Record Pause, Record indicator a lights Recording starts

NORMAL RECORDING

Normal Recording

1Turn the power on to all devices used.

2Load a cassette tape with erasure-prevention tab.

NOTE:

•If in the (SET UP 3) menu, TAPE IN MODE is set to “REC”, recording will start.

3Set the ON SCREEN switch to the “ON” position.

4Press the REC/PLAY SPEED button to set the recording speed.

°The recording speed is displayed on-screen and on the digital display.

GB 5 Press the REC button.

°The Record indicator (a) lights.

°Recording starts.

6To stop recording, press the STOP button.

NOTES:

•A tape recorded on this VCR cannot be played back on a time lapse VCR produced by another manufacturer.

•If you press on the REC button and the loaded cassette has no erasure-prevention tab, the VCR will eject the cassette.

•During recording, the AUDIO ON/MENU button will not function (the menu cannot be displayed).

•During recording, the tape speed cannot be changed.

[Recording Speed]

Recording	Maximum recording		Recording	Audio
	duration (with an E-180				Tape motion
speed			interval	recording
	cassette tape)
3	Standard	3 hours	1/50 second
	mode			Possible	Continuous
12	Time lapse	15	0.1
24	mode	27	0.18

TAPE COUNTER NOTES:

•There is no tape counter indication for the blank portions of the tape.

•In the 3-hour recording speed mode only, the tape counter indicates real hours, minutes and seconds.

•In the other recording speed modes, the tape counter indication is a ratio of the 3-hour mode base indication. (In 12-hour recording mode, each “second” of the tape counter actually represents approximately (12/3)+1 = 5 real seconds.)

•There may be a slight discrepancy between the position shown on the tape counter and the actual tape position.

•When rewinding the tape past the “0:00:00” position, a minus (–) sign will be displayed.

Record Pause

Recording can be interrupted temporarily.

1Press the PAUSE/SCAN button during recording.

°The Pause/Still indicator (:) blinks.

NOTES:

•The image appears on-screen but it is not recorded.

•If a recording pause continues for 5 minutes or more, the VCR will go into stop mode to avoid damaging the tape.

2To resume recording, press the REC button, or press the PAUSE/SCAN button again.

English 11