Akai AMD20 Using the GO TO function, Using the PROGRAM function, Using the A-BREPEAT function

i

●Normally, if an MP3 disc is loaded, the unit will take longer time to read the initial data.

●A DVD that does not match the region code cannot be read by this appliance.

●If a disc contains mixed content (e.g. MP3 and video files), the appliance will only recognise, list and play one content type.

●The screen saver becomes active if no disc has been loaded for

3 minutes, or if the appliance has been in STOP mode for 3 minutes.

Using the GO TO function

The GO TO function can be used to select a specific starting point on a DVD or CD.

●Press the GO TO button (28).

●Press the arrow buttons to select an entry. The possible entries for DVD are:

- Disc time - Chapter - Title

- Chapter time - Title time

The possible entries for CD are: - Track time

- Specific track

●Press the digit buttons to set a selection.

Using the PROGRAM function

●Press the PROG button (30) to enter the PROGRAM function.

●Press the digit buttons to select a desired track, and use the arrow button down to highlight the next entry.

●To confirm the selection and start the program, move the highlight to "START" and press the ENTER button.

●To stop the progam, press the PROG button (30) and press ENTER.

Using the A-B REPEAT function

The A-B REPEAT function can be used to repeat a specific section of a DVD. ● Press the A-B REPEAT button (36) once to select the starting point (A).

16