Akai AMD20 manual General setup page, Audio setup page, Analog audio setup

●Press the SETUP button (17).

●Press the arrow buttons (left and right) (19) to select a menu. The submenu is displayed directly.

●Press the arrow buttons (up and down) to enter the submenu.

●Press the ENTER button (24) to select a setting, or the left arrow button to cancel the selection.

●Press the SETUP button to store the settings and exit.

General setup page

●In the TV DISPLAY section, press the arrow buttons to select 4:3 PANSCAN or 4:3 LETTERBOX for a conventional TV set. Select 16:9 or WIDE SQUEEZE for a wide screen TV set.

●In the ANGLE MARK section, press the arrow buttons to switch this function ON or OFF. When switched ON, the appliance shows the angle mark when multi-camera angles are available.

●In the OSD LANG section, press the arrow buttons to choose the language.

●In the CLOSED CAPTIONS section, press the arrow buttons to switch this function ON or OFF. When switched ON, the appliance shows hidden text when it is available.

●In the SCREEN SAVER section, press the arrow buttons to switch the screen ON or OFF.

●In the LAST MEMORY section press the arrow buttons to switch this function ON or OFF. When switched ON, the appliance remembers the disc's last playback time.

Audio setup page

Analog audio setup

●DOWNMIX: Select LT/RT to mix 5.1-channel audio into left channel and right channel. Select STEREO to mix 5.1 channel audio into signal stereo.

i	This function is only available for Dolby AC-3 encoded 5.1-channel
	discs.

20