Akai AMD20 manual Video setup page, Digital audio setup, Dolby digital audio setup

AMD20

Digital audio setup

DIGITAL OUTPUT

●Select SPDIF OFF to switch off the digital audio signal output.

●Select SPDIF RAW to set the digital audio signal output to its raw format (DTS/Dolby Digital 5.1).

●Select SPDIF PCM to set the digital audio signal output to PCM format.

i	When SPDIF PCM is set, the LPCM OUT feature sample rating for
	the analog audio input (48 kHz or 96 kHz).

Dolby digital audio setup

DUAL MONO

●Stereo: both channels as is. STEREO is the default setting.

●L-Mono: left channel only.

●R-Mono: right channel only.

●Mix-Mono: the average of both the left and right channel.

i	This function is only available for Dolby AC-3 encoded 2-channel
	discs.

DYNAMIC

●Select the value for the dynamic range compression to avoid losing sound details resulting from a low volume.

High Definition Compatible Digital (HDCD)

●Select the value (2x, 1x or OFF) for full sound richness of HDCD-encoded CDs.

Video setup page

VIDEO OUTPUT

●OFF: Select S-Video mode of the S-Video connection.

●YUV: Set the video output in analog component video format.

●P_YUV: Set the video output in progressive YUV signals.

●RGB: Set the video output in RGB format when SCART output is used.

21