Operation

ROUTING TO OUT 1

Figure 49: ROUTING TO OUT 1 function

All the input channels can be controlled in the "ROUTING TO OUT 1" mode.

Figure 50: Adjustment range for the function

The function for the relevant channel is switched on by turning the rotary knob in the clockwise direction (entire LED ring is illuminated). Turning the rotary knob counter-clockwise switches the function off (only one LED is illuminated).

Pressing the rotary knob also switches the function on or off.

NOTE

Switching this on sets the input channel to the OUT 1 master bus.

DMM 12BC

67

Page 67
Image 67
AKG Acoustics DMM 12BC manual Routing to OUT 1 function